Logo Allmyblog
Logo Allmyblog
Lien de l'article    

SINGTOSCREWS

Contacter l'auteur de ce blog

5 DERNIERS ARTICLES
- The Ace may be a high playing Flange wood screws
- Now that you invested in an wood lag screws
- Power tools drill thousands of holes in wood lag screws
- Decorating a nursery does not need Self Tapping Screws
- Skateboarding is not only limited to Wood Screw
Sommaire

CALENDRIER
LunMarMerJeuVenSamDim
0102030405
06070809101112
13141516171819
20212223242526
2728293031
<< Août >>

BLOGS FAVORIS
Ajouter singtoscrews à vos favoris

LIENS FAVORIS
- Hexagonal wood screws
- Phillips Wood Screws
 The Ace may be a high playing Flange wood screws Alerter l'administrateur Recommander à un ami Lien de l'article 

The Ace may be a high playing Flange wood screws card in a deck of cards but it is also a most coveted prize in the game of golf. The Ace or proverbial hole in one is considered an eagle on a par 3, which is the more common par for an Ace or hole in one to occur. FYI   a birdie is the golf terminology for one under par and an eagle is two strokes below par, either of which is a substantial accomplishment on any golf hole. On extremely rare occasions, a hole in one has also been recorded on par 4 s, which would be considered a double eagle or Albatross ( three under par ), as affectionately called in the United Kingdom ( England, Ireland and Scotland ). In most extremely rare occasions a score of one has been recorded on par fives, and I m assuming the score would be considered a triple eagle or double albatross. If there is an official name given for a hole in one on a par five I am not privy to it because of the extreme rarity of the occurence. The Guinness Book of World Records notes a number of holes in one on par fives as does Golf Digest archives on occasion.

I can attest from personal experience that beside the skill factor there is some luck involved in achieving a hole in one. I ve been playing golf for over 30 years and have come so close to a hole in one on at least a dozen occasions. My ball has landed within 12&amp #8243; of the cup and has also ended up within 1/2&amp #8243; to 3&amp #8243; on at least 6 of those occasions. The reason I mentioned some luck is involved is that one time I was playing with a relatively new golfer that was probably a 30 handicapper ( average score in the 105 range ) and at the time I was a 12, and he hit his tee shot well off line on a par three hole of approx. 125 yards. The ball hit a tree, well off to the side of the hole, and rebounded back onto the green and went in the hole. I would consider that pretty lucky, wouldn t you agree ? There are a number of other similar tales regarding holes in one but most players who make them are fairly skilled and usually play often.

One time while playing Marine Park Golf Course in Brooklyn I was on the 14th hole par five, which runs adjacent Flatbush Avenue. The hole is approximately 514 yards from the tee location we were playing that day. I hit a drive flush and launched it about 300 yards down the right side of the fairway. I was a fairly long hitter at the time and I knew I could reach the green in two with a five iron for my second shot. I waited for the group in front to clear the green and hit another one on the screws and I knew the ball was heading for the flag and the cup. The group in front was part of the Marine Park Golf Club, which I belonged to at the time, and they were waving and cheering so I thought the ball may have gone in. When I arrived at the green a few minutes later the ball was sitting about a half inch from the cup and a double eagle. I had a tap in for an eagle but a double would have been much more rewarding for me than a hole in one because it is more difficult and a rarer feat to accomplish. I also came within a foot of a double eagle on a 275 yard par 4 one time but once again it was not meant to be. My goal is to get that elusive  Ace  before my 60th birthday, which is a few years away. I wish all you new and seasoned golfers alike the Best of Luck with achieving your  Hole In One . Happy Golfing to All !

  Aucun commentaire | Ecrire un nouveau commentaire Posté le 11-07-2018 à 09h16

 Now that you invested in an wood lag screws Alerter l'administrateur Recommander à un ami Lien de l'article 

Now that you invested in an wood lag screws to run all of your air tools you're going to have to learn how to keep it up and running. Because the standard handyman's air compressors don't typically require daily upkeep, it's easy to forget about them and neglect their upkeep. This can be a costly oversight so it's vital for you to keep an eye on the following maintenance tips.

Maintenance Tip 1: Read and Follow Your Air Compressor's Manual
Nothing stops an air compressor faster than an owner who doesn't read the owner's manual. There's going to be some simple tips in there for you that will help you to get a nice long life out of your air compressor - simple stuff for you to do that you would never have thought to do unless you read it. Plus, if you don't follow the rules in your air compressor manual there's a chance that you'll void your warranty. That in itself should be enough of an incentive to read the "flipping" manual.

Maintenance Tip 2: Drain The Moisture From The Tanks
The receiver tank collects moisture from the air that it's compressing - especially if you live in a humid climate. Most tanks have a valve for draining this moisture that accumulates and it's up to you to make sure that these are drained regularly. Before draining the water you should be sure to release the air pressure from the tanks.

Maintenance Tip 3: Clean Intake Vents
If you force your air compressor to work too hard to intake air you're losing power on your compression. This will gradually degrade the quality of your tool. Be sure to keep your intake vent as clean as possible and check them regularly especially if you're working in a dusty or dirty environment.

Maintenance Tip 4: Tighten All Fasteners
Your air compressor's a running, vibrating engine and it will loosen its screws, nuts and bolts on a regular basis. Be sure to check these periodically and tighten them up if you find any that have jiggled loose.

Maintenance Tip 5: Check Hoses Regularly
Check all your hoses periodically as they are the veins of your air compressor. If they become cracked or corroded they could soon begin to leak and then put undue strain on the rest of your compressor's components. Be sure to check them and replace them if you find them cracked or damaged.

Maintenance Tip 6: Test the Safety Shutdown System
Your air compressor may have a built in safety shut down. The function of this system is to shut off your compressor if it's getting too hot, or if the engine's oil pressure is too low. This test will help you ensure a longer lasting compressor.

Maintenance Tip 7: Check and Change Air Filters As Needed
A filthy air filter is only hurting your air compressor by allowing dirty air from the outside in, plus forcing it to work harder to intake air. Check your filters regularly and change them if you notice a heavy build up of dust and dirt. Change every six months or so if you use it infrequently.

Maintenance Tip 8: Clean the Fuel Tank
As with any engine you need to periodically clean out the fuel tank to ensure optimal operating conditions. You should look to clean out the engine on your air compressor once every year or so to remove any residual build up from the fuel. This will preserve the life of your engine.

Maintenance Tip 9: Check and Change the Compressor Oil
If you're running a compressor that uses oil you should be checking it on a daily basis to make sure that your machine is topped off. Then, every 500-1000 hours of use you should be changing this oil to ensure maximum functioning of your air compressor.

Maintenance Tip 10: Change the Separator Element
The separator element prevents the excessive use of oil, but it has to be replace periodically. Keep your compressor in top condition by replacing the separator element every 1,000 hours of operation.

Maintenance Tip 11: Clean the Heat Exchangers
If your heat exchangers are dirty then they can't do their job, which is to reduce the operating temperatures of your air compressor. Clean them regularly to keep your operating temperatures down and increase the life span of your air compressor.

By following the tips above you'll ensure a nice long life for your air compressor, plus the jobs that you use it for will go faster and more productively. A well maintained air compressor is a wonderful machine for any job site or workshop, so keep yours running smoothly.

  Aucun commentaire | Ecrire un nouveau commentaire Posté le 11-06-2018 à 09h08

 Power tools drill thousands of holes in wood lag screws Alerter l'administrateur Recommander à un ami Lien de l'article 

Power tools drill thousands of holes in wood lag screws. Take a little time and find the right cordless power drill for your application and make it a happy life for you and the drill.

Everyone has their favorite color drill, yellow blue, red, teal. You know the colors and the brands. But when you consider how many holes power tools drill for you, shouldn t you look beyond the  color ? I feel there are a few things you should consider before you pick your favorite brand or color off the shelf.

First and foremost, what will be it s job? If most of your work is drilling small holes and driving small screws, you don t need a 24 volt monster to get the job done. Sure they have massive power but they can actually slow you down by adding fatigue after an hour or two of work. Many times a 12 volt or 14 volt unit will cover most jobs you may come across. If you need to drill large hole saw holes or deep holes or even use in a hammer drill mode, you may be better off with a big dog, but still the current 18 volt power tools drill with plenty of power for most jobs. If all you do is assembly type work, consider one of the small pocket drivers, especially the light weight lithium.

Battery type. You have 3 choices to choose from. Nicad, Nimh and Lithium batteries. Nicads have been around for years and are a great choice and all the major brands have them. Nimh offers more run time in the same size package although your choices are alot slimmer. Panasonic is the main one for the Nimh although you will find others. The premier choice, in my opinion is the Lithium battery tools. It s hard to believe the run time you can get from such a small battery. Don t worry about the power from such a light battery, remember, 18 volts of Nicad, Nimh or Lithium batteries will give you the same power.

How much will it be used. Remember we said power tools drill thousands of tools? Well not always. My 14 volt Bosch sees about 15 minutes of use every couple of weeks. My 12 volt Bosch saw about the same use for many years before the batteries finally go weak. If you are a homeowner, a lesser priced tool may be adequate for most of you applications. If you are a contractor, don t skimp. A cordless drill is your right hand and makes you a good living. Buy a contractor grade tool and check the warranty. Some tools warranties are void if used in commercial application.

What do you have now. Okay. You have a favorite color tool and you have the radio, the vacuum the hat and everything. Well their is a lot to be said about loyalty. If you already have a whole shop full of Makita, why would you change and have to mix and match chargers and batteries? Valid point.

In conclusion, try to be color blind next time you pick out a cordless tool. Weight the above points and you ll find that both you and your power tools will live happily ever after.

  Aucun commentaire | Ecrire un nouveau commentaire Posté le 06-06-2018 à 03h42

 Decorating a nursery does not need Self Tapping Screws Alerter l'administrateur Recommander à un ami Lien de l'article 

Decorating a nursery does not need Self Tapping Screws to be a project that breaks the bank. Furnishings for a babys room are easy to find in gently used condition. By not purchasing your furnishings new, you can furnish your nursery for a fraction of the normal price. If you plan ahead, you may even be able to find an heirloom piece or a fantastic buy on high quality, barely used nursery furniture.

Bygone Days
There is something special about using an heirloom quilt that many generations of babies have snuggled in before, but you do need to be aware if you are using heirloom furniture in a nursery. Some older cribs and cradles were actually dangerous for the baby. For example, the crib slats were too far apart. And some older paints contained lead, so if you are using an antique piece of furniture for your babys bed, make sure that its construction is safe and strip it of all old paint. If you are repainting the furniture, you may want to add a decorative stencil to tie it into the rest of the nursery.

Display Antiques
Another fun thing to do with heirlooms is to use re purpose them and use them for something different than they were originally intended. For example, antique toys that are too delicate to withstand the rigors of a childs play are great accessories for decorating a nursery. A shelf displaying vintage toys and antique storybooks can be colorful for baby and interesting for parents. It will also make a great focal point for the nursery. You can pull your inspiration from an antique toy and decorate your childs nursery in a monkey theme or a teddy bear theme.

Treasures are All Around
If you do not have any heirlooms that have past from hand to hand in your family, then visit thrift stores and flea markets for some great finds. There are some online auction sites that also have vintage baby wares, and if you keep your eyes peeled, you will make discoveries in the strangest of places. Let friends know that you are looking for vintage toys and furniture, and you may find that someone was just waiting to find a home for their grandmas treasures.

Always Safety First
Again, be aware that old furniture can have loose screws or peeling paint. Construction may be dangerous, and unless you can make the furniture safe, then make sure it is for decorative purposes only. Make sure that any piece of furniture your child is going to actually use is up to modern day safety standards. Many of these standards came to be after a tragic accident that injured a child; so learn from the past and be aware of what you are putting in your childs room, and there is no reason that you cannot build a charming nursery design around family treasures.

By searching out and using vintage items in your babys bedroom, you tell the story of the ages. The juxtaposition of the very young against the very old tells the story of our history, and it gives weight and importance to this room while still leaving it playful and charming.

  Aucun commentaire | Ecrire un nouveau commentaire Posté le 29-05-2018 à 03h38

 Skateboarding is not only limited to Wood Screw Alerter l'administrateur Recommander à un ami Lien de l'article 

Skateboarding is not only limited to Wood Screws being a hobby and a fun sport, it has been accepted at a professional level. Professional skateboarders look for skateboard assembled with quality parts so that they can achieve their goals in skateboarding and also take their skateboarding skills to the next level. Whether skateboarding is taken up for fun or as a serious sport, a perfect skateboard will allow you to do whatever you want, for example simple rides, tricks, flips and many more styles as per your desire. Although all the parts of a skateboard play an important role for the skateboard to work, you need to be careful regarding trucks, which is the part that connects the deck and the wheels of the skateboard and enables you to maneuver the skateboard in the direction you want. Silver skateboard trucks that are comparatively stronger than other regular trucks are exclusively designed to suit the style of modern day technical skateboarding, so to better your skateboarding skills you can depend upon silver skateboard trucks and you can easily find a wide variety of these trucks on the Internet.

Silver skateboard trucks are equipped with incredible strength and can withstand the harshest treatment which in turn facilitates all types of skateboarding. Trucks of any type need to be sturdy and made of good sturdy material, as the top of the trucks are connected to the board with screws and the lower part to the wheels.  In between these there are bushings which help the trucks in steering mechanism. A bolt called the kingpin holds these parts together and the trucks can be adjusted by loosening or tightening the kingpin. Usually bushings twisted in silver skateboard trucks are made of urethane or metal springs, which makes it easier for the trucks to return to their original straight position after taking a turn and further, they can also be easily loosened for better turning and tightened for more control.

Silver skateboard trucks are one of the highest quality skateboard trucks, as these are not only strong but even lighter and modern compared to other standard skateboards. Lighter trucks are best suitable for flips and tricks, thus it proves to be highly beneficial for skateboarders looking to perform difficult tricks. Beginners can also acquire these skateboard trucks to learn skateboarding and its tricks as well. You can either build your own skateboard with silver skateboard trucks so as to raise the quality of your skateboard, but nowadays you can also find a variety of pre assembled skateboards that include silver skateboard trucks and which also turns out to be low cost effective and create a perfect self made unique model, that will be the only one of its kind. When looking for skateboard trucks make sure that you buy the one that is most suitable to your deck and is fitted properly with good quality hardware, so that the trucks can work better and allow you to enjoy your skateboarding. Feel the difference when skateboarding with silver skateboard trucks!

  Aucun commentaire | Ecrire un nouveau commentaire Posté le 15-05-2018 à 05h39


|<< | 1 |  2   3  >>> >>|


SYNDICATION
 
Fil RSS 2.0
Ajouter à NetVibes
Ajouter à Google
Ajouter à Yahoo
Ajouter à Bloglines
Ajouter à Technorati
http://www.wikio.fr
 

Allzic en direct

Liens Commerciaux
L'information à Lyon
Retrouvez toute l'actu lyonnaise 24/24h 7/7j !


L'information à Annecy
Retrouvez toute l'actu d'Annecy 24/24h 7/7j !


L'information à Grenoble
Retrouvez toute l'actu de Grenoble 24/24h 7/7j !


Application Restaurant
Restaurateurs, demandez un devis pour votre application iPhone


Fete des Lumières
Fête des lumières : vente de luminaires, lampes, ampoules, etc.


Diffuseur
Acheter un diffuseur d'huiles essentielles

Votre publicité ici ?
  Blog créé le 02-03-2018 à 02h59 | Mis à jour le 11-07-2018 à 09h16 | Note : Pas de note